How to Install a Do it By yourself Bedliner in five Steps

My sons and I not too long ago installed a do it by yourself bedliner on our 1980 pickup. It’s challenging to believe how much far better it appears. We located several methods as we accomplished the project. Below are 5 measures to the venture and suggestions to get it accomplished correct.

Action one – Select the right truck mattress paint…

Truck bed paint is special. It really is a polyurethane paint , but it consists of rubber pieces to give it texture. The top makes are Herculiner, Plasti-Kote and Duplicolor. You may want about five quarts for a full dimension truck. Get a lot of paint, because a excellent thick coat is what you want.

Step 2 – Cleanse 1st…

A very good thoroughly clean floor is the very first stage to success. Washing the bed is essential, but it is not adequate. That’s since you need to get rid of any previous wax or grease. That is effortless. Just get a regularly automotive grease and wax remover from your car areas store.

Stage three – Tough is very good…

Paint sticks ideal to a area which is been roughed up or sanded. Never spare the abrasives. Use rough sandpaper or other abrasives to really scratch up the floor to be coated. Which is a trick to a paint coat that truly sticks and lasts.

Action four – Mask or else…

SPRAY ON BEDLINER is really sticky. Get it the place you will not want it and you’ve got obtained difficulty. So mask meticulously for a neat occupation.

Step 5 – Rolling is easy…

Bed liner paint can be brushed, rolled or sprayed on. This paint is so hefty and thick, you can not tell a rolled on coating wasn’t sprayed on. A roller puts on a lovely coating. Here’s the factor. Do the planning correctly. Get the floor cleaned and sanded proper. Then making use of the finish couldn’t be easier. There’s nothing at all to applying the coating.

Conserve a pile of money and make your truck appear much better with a do it by yourself bedliner. It really is effortless to do. Just make positive and do not skip the cleaning and sanding. This is a excellent way to increase the looks of an older truck.

Add a Comment

Your email address will not be published. Required fields are marked *